期刊文献+

基于动力学仿真的后桥壳改进设计计算 预览 被引量:7

A Design for Improving the Vehicle Rear Axle Housing Based on Dynamic Simulation
在线阅读 下载PDF
收藏 分享 导出
摘要 某越野车后桥改型后进行台架试验,其桥壳发生了断裂.为了解决此问题,应用ADAMS仿真软件,建立了后悬架动力学模型.然后采用后轮道路载荷谱作为输入载荷,再进行仿真分析,得到了最大峰值载荷时各连接点处的载荷.采用有限元方法对该车后桥壳结构强度、刚度进行计算分析,发现了桥壳断裂的原因,并对其进行了改进设计.改进设计后的后桥壳经台架试验再无断裂现象. In the fatigue test for the modification of A SUV rear axle, part of the housing was fractured. In order to solve this problem, the rear suspension dynamic model was constructed via ADAMS. After inputting the road-load spectrum, all the rear axle link point loads were calculated, and the highest loads on each joint were obtained. Then the mode analysis and fatigue analysis of the rear axle housing were implemented by FEM, and the strength and the stiffness characteristic were worked out. The cause of the fracture was found out and some improvements were made. There have been no such fractures at the improved housing during the bench test.
作者 唐应时 李立斌 何友朗 肖立军 TANG Ying-shi, LI Li-bin, HE You-lang, XIAO Li-jun (1.State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan Univ,Changsha ,Hunan 410082, China; 2. Hunan Industrial Vocational College, Changsha, Hunan 410208, China; 3. R & D Center of Hunan Changfeng Motors Co. , Ltd,Changsha, Hunan 410100, China)
出处 《湖南大学学报:自然科学版》 EI CAS CSCD 北大核心 2006年第4期 42-45,共4页 Journal of Hunan University(Naturnal Science)
基金 “985工程”汽车先进设计制造技术科技创新平台资助项目
关键词 动力学仿真 后桥壳 道路载荷谱 有限元计算 模态分析 dynamics rear axle housing load spectrum finite element method mode amalysis
  • 相关文献

参考文献7

  • 1刘惟信主编..汽车设计[M].北京:清华大学出版社,2001:781.
  • 2张越今.汽车多体系统建模与数值计算仿真分析[M].长春:吉林科学技术出版社,1998. 被引量:4
  • 3Mechanical Dynamics Inc.Using ADAMS/CAR[CP/CD].Los Angeles:MSC Softurare,2000. 被引量:1
  • 4COLLOP A C,CEBON D A.Theoretical analysis of fatigue cracking in flexible pavements[J].Proc Instn Mesh Engrs,1995,209(C5):345-361. 被引量:1
  • 5蔡志武,陈洁,史英明.某车型后桥壳的分析研究[C]//2004ANSYS中国用户论文集.2004. 被引量:1
  • 6杜平安编著..结构有限元分析建模方法[M].北京:机械工业出版社,1998:209.
  • 7唐应时,李阳,何友朗.自卸车车架的静动态计算分析[J].专用汽车,2006(1):25-28. 被引量:18

二级参考文献3

共引文献20

同被引文献43

引证文献7

二级引证文献23

投稿分析
职称考试

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈