期刊文献+

GIBR叠层方片形发射药的燃烧特征 预览 被引量:11

Combustion Characteristics of GIBR Layered Square Flake Gun Propellant
在线阅读 下载PDF
收藏 分享 导出
摘要 为了研究具有燃速渐增特性和分层结构的方片状发射药的燃烧特性,提出了该药的燃烧物理模型,以此模型建立了相应的形状函数,并对不同外层比例X1、燃速系数比K、药片厚度与宽度之比β条件下相对已燃质量皿、相对表面积σ随相对已燃厚度Z的变化进行计算和分析.通过射击试验和中止燃烧试验,对理论计算结果进行验证.结果表明,通过调整内外层比例、药型尺寸和燃速系数比,可以有效地控制分层结构片状发射药在不同时期的气体生成速率,而且实际燃烧规律与理论模型预测的结果基本一致,因此该物理模型基本反映了该种发射药的实际燃烧规律. In order to study the progressivity of GIBR (gradual increasing burning rate) layered propellant with square flake shape, the physical model about the combustion process was put forward, and the shape function was calculated according to the physical model and the parallel layer burning law. The change of Ψ, σ with Z was calculated and analyzed at different parameters such as X1, K and β. The result by theoretic study was validated by interrupted burning method both in gun chamber and closed bomb. The results show that the gas generating rate of the layered propeUant can be controlled by adjusting the burning rate, dimension and thickness ratio of outer-layer to inner-layer. The results also show that the factual combustion law and theoretic model are consistent and the combustion process approximately reflects the parallel layer burning law.
作者 蔺向阳 潘仁明 薛耀辉 殷继刚 郑文芳 LIN Xiang-yang, PAN Ren-ming, XUE Yao-hui, YIN Ji-gang, ZHENG Wen-fang (1 .School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China; 2. Wuzhou Engineering Design and Research Institute, Beijing 100054, China)
出处 《燃烧科学与技术》 EI CAS CSCD 北大核心 2007年第2期 187-191,共5页 Journal of Combustion Science and Technology
基金 中国人民解放军总装备部预先研究资助项目(40406010501).
关键词 发射药 燃速 渐增 形状函数 分层 gun propellant burning rate progressivity shape function layer
作者简介 蔺向阳(1969-),男,博士研究生,高级工程师; 联系人:潘仁明,Panrenming@163.com.
  • 相关文献

参考文献7

二级参考文献8

共引文献42

同被引文献71

引证文献11

二级引证文献15

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;