期刊文献+

基于线阵CCD的激光FPC加工定位方法研究 预览 被引量:1

Study of positioning in machining by laser of FPC based on linear CCD
在线阅读 下载PDF
收藏 分享 导出
摘要 为在FPC激光柔性加工系统中对FPC板进行精确定位,本文提出了一种基于线阵CCD的精确定位方法。首先阐明了线阵CCD的工作原理和激光FPC加工过程的定位原理。然后分析了采集数据的处理方式,并给出了定位操作的流程。最后通过计算相对坐标实现了线阵CCD定位,总结出了该定位方法具有定位精度高、操作灵活、视场大等优点。 A positioning method by linear CCD with high precision was presented for precise machining by laser of FPC. To begin with it elucidated the principles of working by linear CCD and positioning. Then it researched on dealing with data and the flow of positioning. Finally, the method was actualized by counting relative coordinate, having some good qualities, such as high precision, flexible operation and big area of scan.
作者 王天雷 张振普 WANG Tian-lei,ZHANG Zheng-bu(1.School of information, 2. Department of Mechanical Engineering, Wuyi University,Jiangmen,Guangdong 529020,China)
出处 《激光杂志》 CAS CSCD 北大核心 2009年第3期 52-54,共3页 Laser Journal
基金 广东省自然科学基金资助项目:06029832 广东省工业攻关计划项目:2006A104010080
关键词 线阵CCD 定位 激光 FPC加工 高精度 linear CCD positioning laser FPC machining high precision
  • 相关文献

参考文献6

  • 1H. Golnabi. Precise CCD image analysis for planar laser - induced fluorescence experiments[J]. Optics & Laser Technology,2006 (38): 152- 161. 被引量:1
  • 2Jeon- Ha Kim, Deok- Kyu Moon, Deuk- Woo Lee, et al.Tool wear measuring technique on the machine using CCD and exclusive jig[J].Journal of Materials Processing Technology, 2002, (130 - 131 ) :668 - 674. 被引量:1
  • 3张洪涛,段发阶,丁克勤,叶声华.基于两步法线阵CCD标定技术研究[J].计量学报,2007,28(4):311-313. 被引量:12
  • 4米本和也.CCD/CMOS图像传感器基础与应用[M].陈榕庭,彭美桂,译.北京:科学出版社,2006. 被引量:46
  • 5H.L.Peek, et al.A low dark current double membrane Poly- Si FT- Technology for 2/3 inch 6M pixel CCD imagers [ J ]. in IEDM Tech. Dig, 1999, (I) :871 - 874. 被引量:1
  • 6李庆扬,王能超,易大义编..数值分析[M].武汉:华中科技大学出版社,2006:249.

二级参考文献7

  • 1Muehlemann Mike.Stancardizing Defect Detection for the Surface Inspection of Large Web Steel[Z].Illumination Technologies,Inc.2000. 被引量:1
  • 2Tsai R Y.A versatile camera calibration technique for highaccuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses[J].IEEE J of Robotics and Automation,1987,RA-3(4):323 - 344. 被引量:1
  • 3Gazzani F.Performance of a 7-parameter DLT method for the calibration of stereophotogrammetric systems using I-D transducers[J].Biomedical Engineer,1992,(14):476-482. 被引量:1
  • 4Blanch Z G,Gazzan F,Macellari V.The COSTEL system for human motion measurement and analysis[J].SPIE Proc Image based Motion Measurement,.1990,1356:38- 50. 被引量:1
  • 5Hayashi T.Calibration of linear CCD cameras used in the detection of the position of the light spot[J].IEICE Trans Inf & Syst,1993,E76-D(8):912-918. 被引量:1
  • 6王建民,鲁振智.一种新的二维图像测量统系标定方法[J].计量学报,2000,21(4):241-247. 被引量:10
  • 7骆文博,王广志,丁海曙,秦志军,吴剑.基于线阵CCD的高精度位置检测[J].清华大学学报:自然科学版,2002,42(9):1139-1143. 被引量:32

共引文献56

同被引文献8

引证文献1

二级引证文献3

投稿分析
职称考试

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈