期刊文献+

小几何特性小孔径细水雾离心喷嘴的数值模拟 被引量:3

Numerical simulation of minor geometry characteristics and small orifice water mist swirl injector
收藏 分享 导出
摘要 针对最大流量原理法在设计小几何特性小孔径细水雾离心喷嘴方面的不足,采用Fluent软件中的多相流混合模型,模拟了包含蒸气和水两相的喷嘴内部流动,得到了流量、喷雾锥角等宏观参数,并和实验测量数据以及理论计算值进行了对比,分析了不同结果产生的原因;同时,还对喷嘴内的气液两相体积分数、轴向与切向速度、压力分布等流场特性参数进行了分析,着重论述了与理论模型之间的差异以及相应的机理.数值模拟方法考虑了液体的粘性和壁面摩擦力等因素,较好地反映了喷嘴内部的流场特性,为小几何特性小孔径细水雾离心喷嘴的设计提供了借鉴. Due to the deficiency of the maximum discharge principle with regard to the design of the minor geometry characteristics and small orifice water mist swirl injector,a numerical investigation on it was performed by simulating the inner flow field of two phase flow injector using the mixture model in Fluent,from which the flow rate and spray angel α were obtained and compared with the experimental data and the theoretical calculation results.The gas-liquid phase distribution,axial velocity and tangential velocity,pressure distribution in the injector were also investigated.The discrepancy between the investigation and the traditional design theory was discussed and the mechanism was concluded.The viscosity of liquid and the friction of wall were taken into account which made the simulation can describe the inner flow field of injector accurately and the numerical simulation provides a reference for the design of minor geometry characteristics and small orifice water mist swirl injector.
作者 范文宏 凌宗余 富庆飞 杨杰 Fan Wenhong Ling Zongyu(School of Chemistry and Environment,Beijing University of Aeronautics and Astronautics,Beijing 100191,China)Fu Qingfei Yang Jie(School of Astronautics,Beijing University of Aeronautics and Astronautics,Beijing 100191,China)
出处 《北京航空航天大学学报》 EI CAS CSCD 北大核心 2011年第5期538-544,共7页 Journal of Beijing University of Aeronautics and Astronautics
基金 航空科学基金资助项目(2007ZB51016)
关键词 数值模拟 几何特性 细水雾 离心喷嘴 numerical simulation geometric constant water mist swirl injector
作者简介 范文宏(1971-),女,黑龙江大庆人,副教授,fanwh@buaa.edu.cn.
  • 相关文献

参考文献11

二级参考文献18

  • 1[2]Bazarov Vladimir G. Influence of propellant injector stationary and dynamic parameters on high frequency combustion stability[R]. AIAA 96-3119. 被引量:1
  • 2[3]Dumouchel C, Bloor M I G, Dombrowski N, et al. Viscous flow in a swirl atomizer[J]. Chemical Engineering Science, 1993,48(1):81~87. 被引量:1
  • 3[4]Hutt J J, McDaniels D M, Smith A W. Internal flow environment of swirl injectors[R]. AIAA 94-3262. 被引量:1
  • 4[5]Jeng S M, Jog M A, Benjamin M A, Computational and experimental study of liquid sheet emanating from simple fuel nozzle[J]. AIAA Journal, 1998,36(2). 被引量:1
  • 5[8]Rizk N K, Lefebvre A H. Internal flow characteristics of simplex swirl atomizers[J]. Journal of Propulsion and Power, 1985, 11(3). 被引量:1
  • 6N K Rizk. Studies on Liquid Sheet Disintegration in Airblast Atomization. Ph.D. Thesis, Granfield Institute of Technology, 1977. 被引量:1
  • 7R P Fraser, N Dombrowski, J H Routley. The Production of Uniform Liquid Sheets from Spinning Cups; The Filming of Liquids by Spinning Cups; The Atomization of a Liquid Sheet by an Impinging Air Stream. Chem.Eng. Sci,, 1963, 18: 315-321,323-337, 339-353. 被引量:1
  • 8S M Jeng, M A Jog, M A Benjamin, Computational and Experimental Study of Liquid Sheet Emanating from Simplex Fuel Nozzle. AIAA Journal, 1998, 36(2): 201-2O7. 被引量:1
  • 9A T Sakman, M A Jog, S M Jeng, et al. Parametric Study of Simplex Fuel Nozzle Internal Flow and Performance.AIAA Journal, 2000, 38(7): 1214-1218. 被引量:1
  • 10H Lefebvre. Gas Turbine Combustion. McGRAW-HILL BOOK COMPANY, 1983. 被引量:1

共引文献56

同被引文献26

引证文献3

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈