期刊文献+

典型断面渠道正常水深计算 预览 被引量:2

Calculation of water normal depth in channels with common shapes
在线阅读 下载PDF
收藏 分享 导出
摘要 明渠正常水深的计算是排灌渠道设计中的一项重要工作.通过对典型渠道断面引入包含渠道糙率、底坡、断面几何要素和流量的一组量纲为一的参数,将目前文献中正常水深的显式计算公式进行量纲为一化的统一表达,使其更具有通用性并且方便进行相对误差评价;指出每种典型渠道断面量纲为一的参数在实际工程中的常用取值范围,在此范围内对各量纲为一的显式计算公式进行相对误差评价,作出相对误差全局分布图,比较各显式公式的最大相对误差和全局相对误差,并比较公式的简捷性,据此优选出梯形、圆形、弧底梯形、普通城门洞形、马蹄形等5种断面正常水深简捷、精度高、适用范围广的显式计算公式;应用最优一致逼近原理,提出标准城门洞形断面正常水深分段表示的显式计算公式.相对误差分析表明:推荐出的6种典型渠道断面正常水深的显式计算公式的最大相对误差均小于1%,可为典型断面排灌渠道的设计及水力计算提供有效的计算方法. Water normal depth calculation is an important task in the design of an open channel for drainage and irrigation. First, dimensionless variables including channel roughness coefficient, bed slope, geometric parameters, and discharge were introduced for each common section. In order to obtain general equations and evaluate their accuracy, the explicit equations available for water normal depth were expressed by those dimensionless variables. Then, the real ranges of those variables were specified for each common section in applications, the relative errors in the explicit equations that involve the variables were analyzed in the ranges. Also, the global relative error distribution diagrams were plotted to compare the maximum relative error and the global one. According to these analyses, the most appropriate equations, which can explicitly calculate the water normal depth in the channels with five types of common section, were spotted. Finally, based on the best approximations algorithm a new piecewise explicit equation was proposed for the water normal depth in a standard castle-gate section. It was shown that the maximum relative errors in all the recommended equations are less than 1% for the water normal depth in six types of common section. The results in the paper have provided an effective method for designing channels with six types of common section and carrying out hydraulic calculations.
作者 刘计良 王正中 苏德慧 杨晓松 刘铨鸿 Liu Jiliang , Wang Zhengzhong, Su Dehui , Yang Xiaosong , Liu Quanhong (1. Institute of Water Resources and Hydropower Engineering, Northwest A & F University, Yangling, Shaanxi 712100, China; 2 Montgomery & Barnes, Inc. , Houston, Texas 77067, USA)
出处 《排灌机械工程学报》 北大核心 2012年第3期 324-329,共6页 Drainage and Irrigation Machinery
基金 国家自然科学基金资助项目(51179164) 陕西省农业科技创新项目(2011NXC01-20) 陕西省水利科技项目(2011-03)
关键词 排灌渠道 断面形式 特征水深 正常水深 相对误差 显式公式 channels for drainage and irrigation channel shapes characteristic depths normal depth relative error explicit equations
作者简介 刘计良(1984-),男,山东邹城人,博士研究生(liujiliang430@163.com),主要从事水工结构及工程水力学研究. 王正中(1963-),男,陕西彬县人,教授,博士生导师(通信作者,wangzz0910@163.com),主要从事水工结构工程及工程水力学研究.
  • 相关文献

参考文献16

二级参考文献83

共引文献76

同被引文献5

引证文献2

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈