期刊文献+

砂轮刚性对磨削性能及产品加工质量的影响 认领 被引量:2

Influence of wheel stiffness on grinding performance and product machining quality
在线阅读 免费下载
收藏 分享 导出
摘要 通过测量不同砂轮磨削时机床功率、磨削区温度、刀具的表面粗糙度和刃口质量,分析砂轮刚性改变对砂轮磨削性能和刀具质量的影响。研究发现:在一定范围内降低砂轮的刚性可以提高砂轮的磨削性能,改善刀具的加工质量。其中,加入体积分数10%的尼龙制备的砂轮对其刚性改善比较明显,在相同的磨削条件下,其磨削区的平均温度较普通砂轮磨削区的平均温度低50℃左右;累计磨削相同工件后,机床负载约为使用普通砂轮时的30%~50%;磨削得到的刀具表面粗糙度降低,可以达到Ra0.02μm以下,且磨削纹路规则;在×500倍显微镜下,观察不到刀具崩刃等缺陷,刃口质量得到明显改善。 By comparing machine power,grinding temperature,tool surface roughness and the quality of the cutting tool edge,the influence of grinding wheel stiffness on grinding performance and quality of cutting tools was analyzed.It has been proved that,in a certain extent,the reduction of grinding wheel rigidity could improve grinding performance and quality of the tool.In addition,the rigidity improvement of grinding wheel is obvious when adding 10vol% nylon,the average grinding temperature of which is 50 ℃lower than that of common grinding wheel under the same grinding conditions.After grinding the same number of workpieces,the machining power of low rigidity grinding wheel is 30%to50%that of the ordinary wheel.It is found that tool surface roughness value Racan reach lower than 0.02μm after grinding with uniform ground surface.At a microscope of 500 times,no collapse edge defect can be seen,which means that the blade qualityis improved significantly.
作者 赵延军 钱灌文 刘权威 张高亮 王礼华 邵俊永 ZHAO Yanjun1,2, QIAN Guanwen1, LIU Quanwei1, ZHANG Gaoliang1, WANG Lihua1, SHAO Junyong1,3 (1. Zhengzhou Research Institute for Abrasives ~ Grinding Co., Ltd., Zhengzhou 450001, China) (2. National Superhard Materials ~ Related Products Engineering Research Center, Zhengzhou 450001, China) (3. State Key Laboratory of Superabrasives, Zhengzhou 45001, China)
出处 《金刚石与磨料磨具工程》 CAS 2017年第1期56-60,共5页 Diamond & Abrasives Engineering
基金 转制科研院所创新能力专项资金项目(2014EG219123)
关键词 刚性 机床功率 磨削区温度 表面粗糙度 刃口质量 rigidity machine power grinding temperature surface roughness cutting edge quality
  • 相关文献

参考文献10

二级参考文献24

共引文献46

同被引文献11

引证文献2

必果论文
维普数据出版直通车
投稿分析
职称考试

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈