期刊文献+

脆性及准脆性开裂界面的剪胀内聚力模型

Cohesive zone model with dilation for brittle and quasi-brittle cracking interfaces
收藏 分享 导出
摘要 根据界面剪胀与Ⅱ型断裂能间的关系,给出构造含剪胀效应张力-位移关系的新途径,该方法先假定Ⅱ型张力-位移关系,再计算界面剪胀函数,从而更易于应用。通过定义基于能量和界面不连续位移的4个损伤变量,给出含剪胀效应的损伤张力-位移关系表示形式,使模型不仅能模拟单调加载问题,而且可模拟反复加载问题。对界面在受压状态下的切向粘结强度、法向位移和摩擦作用分别进行了讨论,给出了相应的计算方法或取值建议。最后通过一个张力-位移关系的实例讨论了界面压力作用、复合模式开裂、卸载-再加载行为和接触罚刚度对法向位移的影响等模型性质。 According to the relationship between interface dilation and modeⅡfracture energy,a new way of constructing traction-separation law with dilation was presented.The method,by first assuming the modeⅡtractionseparation relationship,and then deriving the interface dilation,was easier to apply.Defining four damage variables based on the interface separation and fracture energy,traction-separation laws with dilation considering damage effects were further given.This enables the model to simulate not only the monotonic loading problems but also reversed loading problems.In addition,interface tangential bonding strength,normal separation,and friction effect under interfacial pressure were discussed respectively,which led to corresponding computing methods or recommended value.Finally,an example of traction-separation law with dilation considering damage was proposed.Utilizing finite element method,interface pressure,mixed mode effect,unloading and reloading behavior,and effects of contact penalty stiffness on normal separation were investigated thoroughly.
作者 郭生栋 杨应华 GUO Shengdong, YANG Yinghua(School of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China)
出处 《复合材料学报》 CSCD 北大核心 2018年第10期2906-2918,共13页 Acta Materiae Compositae Sinica
基金 陕西省建设科技计划(2016-K83)
关键词 复合模式断裂 界面性能 脱粘 界面损伤 界面分离 有限元方法 mixed mode fracture interracial properties debonding interface damage interface separation finite element method
作者简介 通讯作者:杨应华,博士,教授,博士生导师,研究方向为结构工程、钢结构、混合结构E-mail:yhyang@xauat.edu.cn
  • 相关文献

参考文献5

二级参考文献48

  • 1陈陆平,潘敬哲.复合材料纤维/基体界面失效问题的参变量有限元数值模拟[J].复合材料学报,1993,10(1):71-75. 被引量:16
  • 2Murasawa G. Deformation behavior of NiTi/polymer shape memory alloy composites experimental verifications [J]. Journal of Composite Materials, 2004, 38(5): 399-416. 被引量:1
  • 3Zhang R X, Ni Q Q, Natsuki T, Iwarnoto M. Mechanical properties of composites filled with SMA particles and short fibers [J]. Composite Structures, 2007, 79: 90-96. 被引量:1
  • 4Ni Q Q, Zhang R X, Natsuki T, Iwamoto M. Stiffness and vibration characteristics of SMA/[R] composites with shape memory alloy short fibers [J].Composite Structure, 2007, 79: 501-507. 被引量:1
  • 5Kang K W, Kim J K. Effect of shape memory alloy on impact damage behavior and residual properties of glass/epoxy laminates under low temperature [J].Composite Structure, 2009, 88: 455-460. 被引量:1
  • 6Aurrekoetxea J, Zurbitu J, Ortiz de M I, Agirregomezkorta A, Sdnchez-Soto M, Sarrionandia M. Effect of superelastic shape memory alloy wires on the impact behavior of carbon fiber reinforced in situ polymerized poly ( butylene terephthalate) composites[J]. Materials Letters, 2011, 68 863-865. 被引量:1
  • 7Wang Y L, Zhou L M, Wang Z Q, Huang H T, Ye L. Stress distributions in single shape memory alloy fiber composites [J]. Materials and Design, 2011, 32(7): 3783-3789. 被引量:1
  • 8Wang Y L, Zhou L M, Wang Z Q, Huang H T, Ye L. Analysis of internal stresses induced by strain recovery in a single SMA fiber-matrix composite [J]. Composites Part B: Engineering, 2011, 42(5) : 1135-1143. 被引量:1
  • 9Pan Y, Iorga L, Pelegri A A. Analysis of 3D random chopped fiber reinforced composites using FEM and random sequential adsorption [J]. Computational Materials Science, 2008, 43: 450-461. 被引量:1
  • 10Wang Z Q, Wang X Q, Zhang J F, Liang W Y, Zhou L M. Automatic generation of random distribution of fibers in long- fiber- reinforced composites and mesomechanical simulation [J]. Materials and Design, 2011, 32: 886-891. 被引量:1

共引文献26

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈