期刊文献+

两垄四行花生联合收获机横向输送装置的设计与试验 预览 被引量:1

Design and Experiment of the Transverse Delivery Mechanism in the Two- ridges and Four- lines Peanut Combine Harvester
在线阅读 下载PDF
分享 导出
摘要 为解决目前两垄四行花生联合收获机中清选装置重复设置的问题,设计了一种横向输送装置,用以实现花生果在夹持输送工序后的汇集,进而落入同一清选装置完成荚果与杂质的分离,达到节省资源降低功耗的目的。该装置主要由联轴器、轴、轴承座、链轮、链条、刮板、栅条底板和机具护罩等组成。同时,通过试验与分析确定了输送装置刮板的最优结构参数:刮板高度42mm,刮板安装角度70°,刮板长度650mm。优化后的输送装置作业效果明显提高。 In order to solve the problem that the present two-ridges and four-lines peanut combine harvester with dupli-cation cleaning mechanisms, this paper design a transverse delivery mechanism to realize the peanut to transport together then fall into the same cleaning device to complete the separation of pod and impurities, and to achieve the purpose of saving resources.this device is made up of coupling shaft bearing sprocket chain scraper grids and shells.optimize the structure and test analysis.Through the analysis of experimental data and processing, the scraper of the device determined the best structure and operating parameters:the height of the scraper is 42mm, the angle of it is 70°, the length is 650mm.After optimizing the quality of this device working improve significantly.
作者 原鲁明 王东伟 尚书旗 Yuan Luming;Wang Dongwei;Shang Shuqi;College of Mechanical and Electrical Engineering,Qingdao Agricultural University;Shandong Provincial Engineering Technology Research Center for Rootstalk Crop Production Equipment
出处 《农机化研究》 北大核心 2016年第5期83-86 91,共5页 Journal of Agricultural Mechanization Research
基金 山东省科技发展计划项目(2014GNC112002) 山东省现代农业产业技术体系花生机械岗位项目(SDAIT-05-022-09) 青岛市民生科技计划项目(14-2-3-33-nsh)
关键词 花生联合收获机 两垄四行 横向输送 刮板 peanut combine harvester two-ridges and four-lines transverse delivery mechanism scraper
  • 相关文献

参考文献1

  • 1李宝筏主编.农业机械学[M]. 中国农业出版社, 2003 被引量:14

共引文献13

同被引文献13

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈