期刊文献+

HP-NbM耐热钢异种焊接头组织及性能 预览

Structures and properties of dissimilar welded joints of HP-NbM heat resistant steel
在线阅读 下载PDF
分享 导出
摘要 采用光学显微镜、电子万能试验机和扫描电子显微镜分析研究HP-NbM耐热钢与0Cr18Ni10Ti不锈钢、15CrMo钢异种焊接头的微观组织、常温及高温力学性能以及断口形貌。结果表明:焊接头15CrMo端热影响区发生组织转变,铁素体+珠光体转变为铁素体+马氏体;0Cr18Ni10Ti端热影响区析出较多的α相;常温下两种焊接头的屈服强度均高于母材,但是断后伸长率低于母材;高温下两种焊接头的抗拉强度随着应变速率的增加而提高。 In this paper,the microstructure,mechanical properties at room temperature and high temperature,and the fracture morp-hology of dissimilar welded joints between HP-NbM heat-resistant steel and 15CrMo steel,0Cr18Ni10Ti stainless steel were analyzed by the optical microscope,electronic universal testing machine,and scanning electron microscope.The results show that the microst-ructure change occurs in the heat-affected zone of 15CrMo,and the ferrite-pearlite structure transforms into the ferrite-martensite structure.Muchα-phase precipitates in the heat-affected zone of 0Cr18Ni10Ti stainless steel.The yield strength of these two welded joints is higher than the base metal,but the percentage elongation after fracture is lower.Under high temperature,higher tensile strength of these two welded joints was obtained with the increase of strain rate.
出处 《电焊机》 2018年第4期42-46,共5页 Electric Welding Machine
关键词 HP-NbM 异种焊接 接头 耐热钢 HP-NbM dissimilar welding welded joints heat resistant steel
作者简介 刘国芹(1990-),女,学士,主要从事金属材料的理化分析及研究工作。E-mail:liuguoqincanyue@126.com。
  • 相关文献

参考文献8

二级参考文献39

共引文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈