期刊文献+

一种新型低分子热塑性树脂体系CBT500/DBTL的界面张力表征 预览

Characterization of interfacial tension of CBT500/DBTL as a new low-molecular thermoplastic resin matrix system
在线阅读 下载PDF
收藏 分享 导出
摘要 为获得真实、可靠的新型低分子热塑性树脂体系CBT500(环对苯二甲酸丁二醇酯)/DBTL(二月桂酸二丁基锡)的界面张力,研究新型树脂体系的混合机理及指导混合设备研制,综合接触角法与调和平均法的各自优势,依据相似理论,提出引用调和平均法修正接触角法,首先研究20~120℃范围内CBT500/DBTL树脂体系的界面张力。其次采用最小二乘法分段线性拟合界面张力修正值并推广。研究结果表明:在20~120℃范围内,CBT500/DBTL树脂体系的界面张力随温度的升高而降低。与接触角法获得的界面张力计算值相比,采用调和平均法获得的界面张力修正值整体减小44.7%,更加接近真实值。得到20~200℃范围内,CBT500/DBTL树脂体系界面张力与温度之间的分段函数关系式。 In order to obtain the real and reliable interfacial tension of a new low molecular mass thermoplastic resin system CBT500/DBTL,a new method based on the harmonic mean method corrected contact angle method was proposed to study the resin mixing mechanism and to guide the development of mixing device.Interfacial tension characterizations were conducted in the range of 20?120℃for the CBT500/DBTL resin matrix system.The least squares method was used to linearly fit the corrected interfacial tension.The results show that the interfacial tension of the resin system decreases with the increase of temperature in the range of 20?120℃,and the corrected interfacial tension obtained by the harmonic mean method is 44.7%lower than that of the contact angle method and closer to true value.The piecewise function of the interfacial tension of the CBT500/DBTL resin system and temperature ranging from 20 to 200℃is obtained.
作者 付继先 吴旺青 刘毅 蒋炳炎 FU Jixian;WU Wangqing;LIU Yi;JIANG Bingyan(School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China;State Key Laboratory of High Performance Complex Manufacturing,Central South University,Changsha 410083,China)
出处 《中南大学学报:自然科学版》 CSCD 北大核心 2018年第10期2423-2429,共7页 Journal of Central South University:Science and Technology
基金 国家自然科学基金资助项目(51405519) 中南大学研究生自主探索创新项目(2017zzts399)。
关键词 原位聚合注射成型 界面张力 调和平均法 接触角法 相似理论 in-situ polymerization injection molding interfacial tension harmonic mean method contact angle method similarity theory
作者简介 通信作者:吴旺青,博士,副教授,从事连续纤维增强热塑性复合材料先进成型技术研究;E-mail:csuwwq@csu.edu.cn。
  • 相关文献

参考文献4

二级参考文献15

  • 1周庆海,高凤翔,王献红,赵晓江,王佛松.聚碳酸1,2-丙二酯/聚琥珀酸丁二酯/邻苯二甲酸二烯丙酯共混体系的研究[J].高分子学报,2009(3):227-232. 被引量:10
  • 2官习鹏,全大萍,廖凯荣,麦堪成.聚(ε-己内酯)/纳米CaCO3复合材料结晶及力学性能研究[J].中山大学学报:自然科学版,2006,45(2):46-50. 被引量:4
  • 3LIU Wenhui, CHEN Biqiang, WANG Fang, et al. Lipase-catalyzed synthesis of aliphatie polyesters and properties characterization[J]. Process Biochem, 2011, 46(10): 1993-2000. 被引量:1
  • 4Battegazzore D, Bocchini S, Frache A. Crystallization kinetics of poly(lactic acid)-tale composites[J]. Express Polym Lett, 2011, 5(10):849-858. 被引量:1
  • 5Sharkawi T, Darcos V, Vert M. Poly(DL-lactie acid) film surface modification with heparin for improving hemocompatibility of blood-contacting bioresorbable devices[J]. Journal of Biomedical Materials Research Part A, 2011, 98(1): 80-87. 被引量:1
  • 6张彪.降解聚合物/纳米高岭土复合材料的结构与动态力学性能的研究[D].杭州:杭州电子科技大学机械工程学院,2012:4-10. 被引量:1
  • 7Alves da Silva M L, Crawford A, Mundy J M, et al. Chitosan/polyester-based scaffolds for cartilage tissue engineering: Assessment of extracelluar matrix formation[J]. Acta Biomaterialia, 2010, 6:1149-1157. 被引量:1
  • 8Ishida K, Inoue Y. Modal difference in comonomer-unit compositional distributions of poly(3-hydroxybutyrate-co-4- hydroxybutyrate)s biosynthesized by two strains, Ralstonia eutropha and Alcaligenes latus[J]. Biomacromole, 2004, 5(3): 1135-1140. 被引量:1
  • 9Janigova I, Lacil I, Chodak I. Thermal degradation of plasticized poly (3-hydroxybutyrate) investigated by DSC[J]. Polym Degra Stabil, 2002, 77(1): 35-41. 2007: 5-20. 被引量:1
  • 10LIANG Zhaoji. Polymer processing rheology[M]. Beijing: National Defense Industry Press, 2007: 5-20. 被引量:1

共引文献44

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈
新型冠状病毒肺炎防控与诊疗专栏