期刊文献+

基于有限元法的跳线线夹温度场计算及影响因素分析 预览

Temperature Field Calculation and Influencing Factors Analysis of Jumper Clamp Based on Finite Element Method
在线阅读 下载PDF
分享 导出
摘要 针对跳线线夹过热问题,建立了跳线线夹三维模型。考虑跳线线夹运行过程中同时存在自然对流散热和热辐射散热,采用有限元法对跳线线夹的三维温度场进行了计算和分析,得到了接触电阻、环境温度和负载电流对跳线线夹温度的影响规律,并建立了一种判断跳线线夹接触情况的模型,提出了一种判断工况下跳线线夹接触情况的方法。研究结果可为判断跳线线夹接触情况及跳线线夹的优化提供参考。 Aimed at the problem of jumper clamp overheating,a 3 Dmodel of jumper clamp was build.Considered it was jointly existed that the natural convection heat dissipation and heat radiation dissipation during the operation of the jumper clamp,the 3 Dthermal field distribution of the jumper clamp was calculated and analyzed by using finite element method.Based on the calculation of that,the influence rules of contact resistance,ambient temperature and load current on the temperature of the jumper clamp were researched.At last,the method for judging the contact condition of the jumper clamp under the working condition was presented.The researching results provided references for optimization of judging contact condition of the jumper clamp and jumper clamp.
作者 王菲菲 樊则宾 张文斌 唐立军 周年荣 WANG Feifei;FAN Zebin;ZHANG Wenbin;TANG Lijun;ZHOU Nianrong(Faculty of Science,Kunming University of Science and Technology,Kunming 650504,China;City College,Kunming University of Science and Technology,Kunming 650051,China;Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming 650504,China;Electric Power Research Institute,Yunnan Power Grid Electric Power Co.,Ltd.,Kunming 650011,China)
出处 《新技术新工艺》 2019年第1期42-46,共5页 New Technology & New Process
关键词 跳线线夹 温度场 接触电阻 有限元法 jumper clamp temperature field contact resistance finite element method
作者简介 王菲菲(1993-),男,硕士研究生,主要从事电力电子等方面的研究。
  • 相关文献

参考文献19

二级参考文献199

共引文献207

投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈