期刊文献+

4K裸眼立体显示系统设计 预览

Design of 4K bare-eye stereoscopic display system
在线阅读 下载PDF
收藏 分享 导出
摘要 随着医疗显示技术的进步,医疗内窥镜摄像系统已经由主流的2D(Two Dimensions)显示向3D(Three Dimensions)显示发展,图像清晰度也从高清(High Definition,HD)向超高清(Ultra High Definition,UHD)转变。因此,本文设计开发了一种基于FPGA的4K(3 840×2 160)裸眼立体显示系统。首先,系统对双路3G-SDI图像采集并进行YUV到RGB的格式转换。其次,使用Xilinx提供的VPSS核实现图像的缩放,同时解决高速图像数据带宽与DDR3存储器带宽间的匹配问题。最后,通过SBS(Side by Side)的拼接方式,将满足立体图像输出格式的视频源通过立体显示器输出。该系统从前端立体图像的采集到后端立体图像的输出,需要经过格式变换、缩放、缓存、同步以及拼接等多个处理过程。实验结果表明,采用参考时钟为148.5 MHz的双路SDI输入,经FPGA的实时处理后可实现分辨率为3 840×2 160、刷新率为60 Hz的SBS拼接格式图像,该图像可直接驱动裸眼立体显示器。 With the development of medical display technology,medical endoscope camera system has developed from the mainstream 2D(Two Dimensions)display to 3D(Three Dimensions)display,and image definition has also changed from high definition(HD)to ultra high definition(UHD).Therefore,this paper designed and developed a 4K medical stereo display system based on FPGA.Firstly,the system carried on dual 3G-SDI image acquisition and YUV to RGB format conversion.Secondly,the VPSS core provided by Xilinx was used to realize image scaling,and the matching problem between high-speed image data bandwidth and DDR3 memory bandwidth was solved.Finally,the video source satisfying the stereo image output format was output by the stereo display through the splicing mode of SBS(Side by Side).The system from the front end stereo image acquisition to the back end stereo image output,needed to go through format transformation,scaling,caching,synchronization and Mosaic and other processes.Experimental results show that the dual-channel SDI input with a reference clock of 148.5 MHz and real-time processing by FPGA can achieve a SBS Mosaic image with a resolution of 3 840×2 160 and a refresh rate of 60 Hz,which can directly drive the naked eye stereo display.
作者 严飞 宋振声 刘银萍 刘卿卿 蔡静怡 YAN Fei;SONG Zhen-sheng;LIU Yin-ping;LIU Qing-qing;CAI Jing-yi(Automation College,Nanjing University of Information Science&Technology,Nanjing 210044,China;Jiangsu Cooperative Innovation Center for Atmospheric Environment and Equipment Technology,Nanjing 210044,China;College of Atmospheric Physics,Nanjing University of Information Science&Technology,Nanjing 210044,China)
出处 《液晶与显示》 CAS CSCD 北大核心 2019年第9期862-870,共9页 Chinese Journal of Liquid Crystals and Displays
基金 国家自然科学基金(No.61605083,No.61701244) 江苏省自然科学基金(No.BK20150903) 江苏省高校自然科学基金(No.16KJB510023)。
关键词 医疗成像 立体显示 FPGA 4K medical imaging stereoscopic display FPGA 4K
作者简介 通信联系人:严飞(1983-),男,江苏南京人,博士,讲师,2014年于中国科学院大学获得博士学位,主要从事信息显示技术方面的研究。E-mail:fyan@nuist.edu.cn。
  • 相关文献
投稿分析

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈