期刊文献+
共找到27,040篇文章
< 1 2 250 >
每页显示 20 50 100
Active control of friction by transverse oscillations
1
作者 J.BENAD K.NAKANO +1 位作者 V.L.POPOV M.POPOV 《摩擦(英文版)》 CSCD 2019年第1期74-85,共12页
The present paper is devoted to a theoretical analysis of sliding friction under the influence of in-plane oscillations perpendicular to the sliding direction.Contrary to previous studies of this mode of active contro... The present paper is devoted to a theoretical analysis of sliding friction under the influence of in-plane oscillations perpendicular to the sliding direction.Contrary to previous studies of this mode of active control of friction,we consider the influence of the stiffness of the tribological contact in detail and show that the contact stiffness plays a central role for small oscillation amplitudes.In the present paper we consider the case of a displacement-controlled system,where the contact stiffness is small compared to the stiffness of the measuring system.It is shown that in this case the macroscopic coefficient of friction is a function of two dimensionless parameters a dimensionless sliding velocity and dimensionless oscillation amplitude.In the limit of very large oscillation amplitudes,known solutions previously reported in the literature are reproduced.The region of small amplitudes is described for the first time in this paper. 展开更多
关键词 SLIDING FRICTION IN-PLANE OSCILLATION contact STIFFNESS COEFFICIENT of FRICTION active control of FRICTION
基于DISlab系统的摩擦力教学测量仪的设计与研究 预览
2
作者 王一超 徐佳林 +2 位作者 郑思怡 张译丹 呼格吉乐 《科技创新与应用》 2019年第16期27-28,共2页
在我们的生活中,摩擦力处处存在而且起着十分重要的作用。在实际的教学过程中,摩擦力的分析一直是教学的难点,对于学生来说,摩擦力的大小和方向只能借助作用效果来分析,会显的十分抽象,不够直观,基于此问题的思考,结合DISlab朗威实验系... 在我们的生活中,摩擦力处处存在而且起着十分重要的作用。在实际的教学过程中,摩擦力的分析一直是教学的难点,对于学生来说,摩擦力的大小和方向只能借助作用效果来分析,会显的十分抽象,不够直观,基于此问题的思考,结合DISlab朗威实验系统制作出了一款摩擦力的测量仪,可以较为直观的展示摩擦力的方向和大小,有助于学生理解和学习摩擦力的相关知识。 展开更多
关键词 摩擦力 滑动摩擦 力的传递 最大静摩擦力 运动情况 DIS实验系统
在线阅读 下载PDF
收获期谷子叶片摩擦特性的试验研究 预览
3
作者 张宁 李红波 +2 位作者 张燕青 崔清亮 孙青芳 《农机化研究》 北大核心 2019年第6期154-161,共8页
为了探明谷子叶片的摩擦特性,降低其对谷子联合收获机割台损失的影响,采用自制摩擦测试装置,联合Instron5544型电子万能试验机,选定谷子张杂10号、晋谷21号和沁州黄等3个品种,分别测定了叶片之间及叶片与不同金属材料接触时的摩擦特性... 为了探明谷子叶片的摩擦特性,降低其对谷子联合收获机割台损失的影响,采用自制摩擦测试装置,联合Instron5544型电子万能试验机,选定谷子张杂10号、晋谷21号和沁州黄等3个品种,分别测定了叶片之间及叶片与不同金属材料接触时的摩擦特性参数。分析了叶片不同方向(纵向和横向)、不同表面(上表面和下表面)、不同倒刺方向(顺纹和逆纹)及不同金属薄板(钢板、铝板、铁板)等因素对叶片摩擦特性的影响规律。试验结果表明:叶片与叶片摩擦时,张杂10号、晋谷21号、沁州黄的静摩擦因数和滑动摩擦因数值范围分别为0.3953~0.9665/0.3695~0.9565、0.3657~0.9467/0.3556~0.8863、0.3570~0.9420/0.3338~0.9088;叶片的方向及倒刺方向两因素对其影响极显著(P<0.01),叶片在横向及逆着倒刺方向时,摩擦因数值较大。叶片与不同金属材料接触时,张杂10号、晋谷21号、沁州黄叶片与不同金属材料板接触时静摩擦因数值和滑动摩擦因数值范围分别为0.2800~0.5865/0.2546~0.4595、0.2625~0.6080/0.2265~0.4595、0.2805~0.4660/0.2676~0.4318;其与铁板的摩擦因数值最高,钢板与铝板次之且无显著差别。研究结果可为谷子收获机械的研制与设计提供一定的技术参数和理论依据。 展开更多
关键词 谷子叶片 摩擦 静摩擦因数 滑动摩擦因数
在线阅读 下载PDF
微坑型微织构硬质合金表面对木材摩擦特性的影响 预览
4
作者 李伟光 张占宽 《林业科学》 EI CAS CSCD 北大核心 2019年第4期136-143,共8页
【目的】探讨木材含水率、木材切面和纤维方向以及运动速度等因素对木材表面摩擦系数的影响规律,为设计更加合理的木材切削刀具表面织构形式提供参考和指导。【方法】以水曲柳和樟子松为研究对象,在具有不同微坑直径硬质合金表面条件下... 【目的】探讨木材含水率、木材切面和纤维方向以及运动速度等因素对木材表面摩擦系数的影响规律,为设计更加合理的木材切削刀具表面织构形式提供参考和指导。【方法】以水曲柳和樟子松为研究对象,在具有不同微坑直径硬质合金表面条件下,研究木材含水率、木材切面和纤维方向以及运动速度等因素对木材表面摩擦系数的影响。【结果】与无微坑表面相比,当微坑直径为60μm、含水率为67%±3%时,在水曲柳表面产生的摩擦系数由0.151降低到0.091,降幅为39.7%,在樟子松表面产生的摩擦系数由0.241降低到0.164,降幅为32.0%。木材径切面上纤维方向差异对表面摩擦系数的影响不大,但在横切面上,微坑直径越小,其表现出的摩擦系数越高。摩擦过程中运动速度对表面摩擦系数的影响与木材中的水分有较大关系,当含水率处于生材状态时,表面摩擦系数随运动速度增大而降低,且微坑型结构表面产生的摩擦系数降幅明显高于无微坑表面,无微坑表面产生的摩擦系数由0.160降低到0.134,降幅为16.3%,微坑直径为60μm时的摩擦系数由0.124降低到0.071,降幅为42.7%。【结论】木材含水率状态对微坑型表面微织构与木材之间的摩擦系数影响较大,木材中自由水的存在有利于降低硬质合金与木材表面之间的摩擦系数。微织构直径越小,其接触角平均变化率越大,表面铺展速度越大,越有利于改善木材/硬质合金摩擦副的状态,使表面间的摩擦系数减小。 展开更多
关键词 木材 切削 摩擦 摩擦系数 微织构
在线阅读 下载PDF
塔磨机橡胶磁性衬板的吸附力研究
5
作者 刘万华 于忠淇 赵骞 《矿山机械》 2019年第4期31-34,共4页
对塔磨机橡胶磁性衬板的磁吸附力进行了研究,通过悬挂重物法,测量出不同材质的磨球在衬板表面的吸附力,再用Ansoft有限元软件,模拟分析了衬板表面磁感应强度分布规律,并计算出衬板与筒体之间的摩擦因数为0.47,最后拟合出橡胶磁性衬板和... 对塔磨机橡胶磁性衬板的磁吸附力进行了研究,通过悬挂重物法,测量出不同材质的磨球在衬板表面的吸附力,再用Ansoft有限元软件,模拟分析了衬板表面磁感应强度分布规律,并计算出衬板与筒体之间的摩擦因数为0.47,最后拟合出橡胶磁性衬板和筒体之间的吸附力与磁极厚度的关系。该研究对大型塔磨机在磁铁矿中的应用具有重要的参考和借鉴价值。 展开更多
关键词 塔磨机 橡胶磁性衬板 吸附力 摩擦力 摩擦因数
Experimental study on the tribo-chemical smoothening process between self-mated silicon carbide in a water-lubricated surfacecontact reciprocating test
6
作者 Le JIN Herbert SCHEERER +2 位作者 Georg ANDERSOHN Matthias OECHSNER Dieter HELLMANN 《摩擦(英文版)》 CSCD 2019年第2期181-191,共11页
Silicon carbide(SiC) can be tribo-chemically smoothened during a self-mated sliding procedure in the aqueous environment.As well reported in the point-contact tests,this smoothening process works well due to the abund... Silicon carbide(SiC) can be tribo-chemically smoothened during a self-mated sliding procedure in the aqueous environment.As well reported in the point-contact tests,this smoothening process works well due to the abundant water as oxidant.After this smoothening process,the tribo-surface is well polished,a closely mated tribo-gap naturally forms,and an ultra-low friction state is built.However,water in the tribo-gap could be insufficient in industrial applications,e.g.,the seal gap in mechanical seals.In this study,the tribo-chemical smoothening behavior in such environment was researched.A surface-contact reciprocating test was used to simulate the aqueous environment where water was insufficient.After tests,compared to the published results from the point-contact tests,the same ultra-low friction state was achieved.A part of the tribo-surface was tribo-chemically smoothened.The obtained smoothened surface microstructure was consistent with the published information.Meanwhile,severe abrasive wear occurred.A porous oxygen-rich layer was found existing beneath the abrasion-induced grooves,in which numerous smashed wear debris adhered on the worn surfaces.We concluded that the shortage of water initiated the severe abrasion,meanwhile the generated wear debris aggravated the wear condition.This understanding is instructive for developing new methods to avoid the severe abrasion in the same water insufficient environment. 展开更多
关键词 silicon CARBIDE surface-contact SLIDING FRICTION tribo-chemical smoothening ABRASION ultra-low FRICTION mechanical seal
The Island Rule with lateral and bottom friction 预览
7
作者 Yanzhao Yang Zexun Wei +2 位作者 Guanlin Wang Zhan Lian Liwei Wang 《海洋学报:英文版》 SCIE CAS CSCD 2019年第4期146-153,共8页
The Island Rule,derived from the Sverdrup theory,is widely used to estimate and analyze water transport through a strait.Previous studies presented single-or multi-island rules with either lateral or bottom friction.I... The Island Rule,derived from the Sverdrup theory,is widely used to estimate and analyze water transport through a strait.Previous studies presented single-or multi-island rules with either lateral or bottom friction.In this paper,an analytical model of wind-driven circulation is assumed based on linear dynamics.Considering both lateral and bottom friction,the analytic solutions of the transport streamfunction around the islands are derived and the volume transport through the channel is presented.The results are similar to those of Wajsowicz,but the frictional constants represent different values.The analytic solution shows that the relationship between the lateral frictional and bottom frictional dissipation is complex in terms of the frictional constants.To understand the interaction between the two friction types,lateral and bottom friction values were randomly chosen on a barotropic beta plane.The result shows an approximately linear relationship between the lateral and bottom friction in consisting of the combined frictional constants.We studied the effect of the channel width on the transport through the channel.The results show that the friction enhances the flow under some widths,which is similar to the flow behavior when only the lateral friction is considered.We also compared the transport through the channel at different depths and founded that the deeper the water,the smaller the transport reduction ratio when the horizontal eddy viscosity coefficient and the bottom drag coefficient remained constants.To further present the combined role of lateral frictional and bottom frictional dissipation,we compared our model with the model of Wajsowicz for two islands,where only the lateral or bottom friction were considered,with different channel widths.The results showed that the effect of the lateral friction is greater than the bottom friction when the channel is narrow,especially in the Munk boundary layer thickness.When the channel is much wider than the Munk boundary layer thickness,the role of the bottom 展开更多
关键词 ISLAND RULE LATERAL FRICTION BOTTOM FRICTION TRANSPORT streamfunction
在线阅读 下载PDF
织造中碳纤维束间的摩擦磨损试验模拟 预览
8
作者 杨洁 吴宁 +3 位作者 李帅 解锡明 焦亚男 陈利 《摩擦学学报》 EI CAS CSCD 北大核心 2019年第1期90-98,共9页
织造过程中碳纤维束的摩擦磨损会导致成型后复合材料制件的机械性能下降.采用自制的试验装置模拟织造过程中经纬纱线间的相互作用,研究了法向负载、预加张力和摩擦速率对碳纤维束摩擦磨损行为的影响.结果表明:碳纤维束的摩擦系数随着法... 织造过程中碳纤维束的摩擦磨损会导致成型后复合材料制件的机械性能下降.采用自制的试验装置模拟织造过程中经纬纱线间的相互作用,研究了法向负载、预加张力和摩擦速率对碳纤维束摩擦磨损行为的影响.结果表明:碳纤维束的摩擦系数随着法向负载的增加而减小,其磨损程度随着法向负载的增加而增大,相对应的碳纤维束拉伸断裂强力也逐渐下降;碳纤维束的摩擦力和摩擦系数因实际摩擦接触面积的变化随预加张力的增加而增大;摩擦速率的增加几乎不影响碳纤维束的摩擦力和摩擦系数,但延长了其测试值达到稳定所需的周期数. 展开更多
关键词 碳纤维 织造 摩擦 磨损 法向负载 预加张力 摩擦速率
在线阅读 免费下载
Cr2AlC含量对铜基复合材料摩擦磨损性能的影响
9
作者 吴辉 郭彪 +3 位作者 李强 敖进清 刘胜明 鲁云 《粉末冶金技术》 CAS CSCD 北大核心 2019年第3期184-190,共7页
采用冷压-烧结方法制备了含质量分数0%、5%、10%、15%Cr2AlC的铜基复合材料,利用光学显微镜、扫描电子显微镜及能谱仪观察并分析复合材料微观组织和微区成分,使用HVS-1000型显微硬度计和M-2000型摩擦磨损试验机测试复合材料的硬度和摩... 采用冷压-烧结方法制备了含质量分数0%、5%、10%、15%Cr2AlC的铜基复合材料,利用光学显微镜、扫描电子显微镜及能谱仪观察并分析复合材料微观组织和微区成分,使用HVS-1000型显微硬度计和M-2000型摩擦磨损试验机测试复合材料的硬度和摩擦磨损性能,分析Cr2AlC质量分数对复合材料硬度、摩擦性能和磨损机理的影响。结果表明:含Cr2AlC铜基复合材料的相对密度为0.8,Cr2AlC均匀分布在铜基体上,有效提高了复合材料的硬度;随Cr2AlC质量分数增加,复合材料摩擦系数先升高后降低,磨损量先降低后回升,当Cr2AlC质量分数为10%时,复合材料的摩擦系数最大,磨损量最低,耐磨性能最佳;未添加Cr2AlC的纯铜材料磨损机理以黏滑为主,含Cr2AlC铜基复合材料的磨损机理是犁削磨损、剥层磨损和氧化磨损三者的结合。 展开更多
关键词 铜基复合材料 硬度 摩擦 磨损 摩擦系数
基于遗传算法辨识的进给伺服系统摩擦特性研究 预览
10
作者 张健 《农业装备与车辆工程》 2019年第3期78-82,共5页
因为直线进给伺服系统容易受到摩擦力的影响,对于以高速高精度直线电机为组成核心的进给系统,消除摩擦力的影响尤为重要。因此,本文以直线电机导轨的摩擦力为研究对象,基于能反映摩擦过程中动静态特性的LuGre摩擦模型,考虑了摩擦迟滞非... 因为直线进给伺服系统容易受到摩擦力的影响,对于以高速高精度直线电机为组成核心的进给系统,消除摩擦力的影响尤为重要。因此,本文以直线电机导轨的摩擦力为研究对象,基于能反映摩擦过程中动静态特性的LuGre摩擦模型,考虑了摩擦迟滞非线性因素的影响。以单轴直线电机进给系统为实验平台,通过LabVIEW构建摩擦力实验测试平台,经过与MATLAB交互的小波去噪算法的滤波后得到摩擦力数据。利用遗传算法的摩擦模型参数辨识方法有效地对模型参数进行了参数辨识。该方法得到的结果与通过实验得到的数据具有一致性,验证了方法的正确性与辨识结果的准确性。 展开更多
关键词 直线电机 摩擦力 小波去噪 遗传算法 参数辨识
在线阅读 下载PDF
Water-based superlubricity in vacuum
11
作者 Chen XIAO Jinjin LI +6 位作者 Lei CHEN Chenhui ZHANG Ningning ZHOU Tao QING Linmao QIAN Jiyang ZHANG Jianbin LUO 《摩擦(英文版)》 CSCD 2019年第2期192-198,共7页
This study achieved water‐based superlubricity with the lubrication of H3PO4 solution in vacuum(highest vacuum degree <10^–4 torr) for the first time by performing a pre‐running process in air before running in ... This study achieved water‐based superlubricity with the lubrication of H3PO4 solution in vacuum(highest vacuum degree <10^–4 torr) for the first time by performing a pre‐running process in air before running in vacuum.The stable water‐based superlubricity was sustainable in vacuum(0.02 torr) for 14 h until the test was stopped by the user for non‐experimental factor.A further analysis suggested that the superlubricity may be attributed to the phosphoric acid–water network formed in air,which can efficiently lock water molecules in the liquid lubricating film even in vacuum owing to the strong hydrogen bond interaction.Such capability to lock water is strongly affected by the strength of hydrogen bond and environmental conditions.The realization of water‐based superlubricity with H3PO4 solution in vacuum can lead to its application in space environment. 展开更多
关键词 FRICTION WATER-BASED SUPERLUBRICITY VACUUM phosphoric ACID
Discharge Coefficient Measurements Using Heron's Fountain 预览
12
作者 Gevo Abcarian Zainab Algharib +5 位作者 Omran Hussain Ana Martin Abraham Villa Francisco Villalobos Tadeh Zirakian David Boyajian 《土木工程与建筑:英文版》 2019年第3期195-203,共9页
Civil Engineering design students at CSUN (California State University, Northridge), aimed to demonstrate the pneumatic action of liquid water as it flows through an airtight one-way vessel system which is known as He... Civil Engineering design students at CSUN (California State University, Northridge), aimed to demonstrate the pneumatic action of liquid water as it flows through an airtight one-way vessel system which is known as Heron’s Fountain. This project explores hydraulic and pneumatics principles commonly found in environment control systems, such as the non-isothermal heating facilities located on the CSUN campus. Since this was a simply constructed version of an ancient Greek fountain, its development required the collaboration of the team to execute its simple function. The parameters involved were diameter, length, height, and density. This analysis utilizes Pascal and Bernoulli’s equations to reinforce the principles of fluid mechanics. The fountain action is described based on flow rate and head loss is described by Darcy’s equation. Friction loss with an angled fitting attached to the fountain head is described by Reynold’s equation. The experiment observed the performances of two types of reentrant tube fittings for head loss: straight and angled. The experiment enhanced the educational experience of the research team by bringing together creative ideas from different educational and cultural backgrounds. The results of the experiment concluded with a 0.58% error for the straight fitting and 5.3% error for an angled fitting. 展开更多
关键词 Heron's FOUNTAIN hydraulic PRINCIPLES air pressure PNEUMATICS FRICTION factor engineering EDUCATION
在线阅读 下载PDF
Mechanical and corrosion properties of low-carbon steel prepared by friction stir processing 预览
13
作者 Li-ying Huang Kuai-she Wang +5 位作者 Wen Wang Kai Zhao Jie Yuan Ke Qiao Bing Zhang Jun Cai 《矿物冶金与材料学报:英文版》 SCIE EI CAS CSCD 2019年第2期202-209,共8页
Low-carbon steel plates were successfully subjected to normal friction stir processing(NFSP)in air and submerged friction stir processing(SFSP)under water,and the microstructure,mechanical properties,and corrosion beh... Low-carbon steel plates were successfully subjected to normal friction stir processing(NFSP)in air and submerged friction stir processing(SFSP)under water,and the microstructure,mechanical properties,and corrosion behavior of the NFSP and SFSP samples were investigated.Phase transformation and dynamic recrystallization resulted in fine-grained ferrite and martensite in the processed zone.The SFSP samples had smaller ferrites(5.1μm),finer martensite laths(557 nm),and more uniform distribution of martensite compared to the NFSP samples.Compared to the base material(BM),the microhardness of the NFSP and SFSP samples increased by 19.8%and 27.1%,respectively because of the combined strengthening effects of grain refinement,phase transformation,and dislocation.The ultimate tensile strengths(UTSs)of the NFSP and SFSP samples increased by 27.1%and 38.7%,respectively.Grain refinement and martensite transformation also improved the electrochemical corrosion properties of the low-carbon steel.Overall,the SFSP samples had better mechanical properties and electrochemical corrosion resistance than the NFSP samples. 展开更多
关键词 low-carbon steel FRICTION STIR processing MICROSTRUCTURE MECHANICAL properties CORROSION
在线阅读 下载PDF
协作机器人关节摩擦特性辨识与补偿技术 预览
14
作者 陶岳 赵飞 曹巨江 《组合机床与自动化加工技术》 北大核心 2019年第4期28-31,共4页
为提高机器人的运动精度和换向过程的运动平稳性,降低换向过程中因摩擦引起的位置误差和速度波动,文章提出了一种基于改进库伦+黏性摩擦模型的补偿方法。该改进模型引入sigmoid函数克服了传统库伦+黏性摩擦模型在换向过程中的不连续问题... 为提高机器人的运动精度和换向过程的运动平稳性,降低换向过程中因摩擦引起的位置误差和速度波动,文章提出了一种基于改进库伦+黏性摩擦模型的补偿方法。该改进模型引入sigmoid函数克服了传统库伦+黏性摩擦模型在换向过程中的不连续问题;并采用恒速辨识方法实现了摩擦模型参数的精确辨识;在此基础上,利用前馈补偿技术实现了机器人关节摩擦特性的补偿。实验结果表明,文中提出的辨识方法能够有效的辨识出摩擦模型参数和基于模型的补偿算法明显降低了换向过程中的摩擦误差。 展开更多
关键词 机器人关节 摩擦 辨识 补偿
在线阅读 下载PDF
Joint formation mechanism of high depth-to-width ratio friction stir welding
15
作者 Yongxian Huang Yuming Xie +2 位作者 Xiangchen Meng Junchen Li Li Zhou 《材料科学技术学报:英文版》 SCIE EI CAS CSCD 2019年第7期1261-1269,共9页
High depth-to-width ratio friction stir welding is an attractive method for the joining demands of alum inum profiles, which is sparked with its extrem ely low heat input and high mechanical performance. In this study... High depth-to-width ratio friction stir welding is an attractive method for the joining demands of alum inum profiles, which is sparked with its extrem ely low heat input and high mechanical performance. In this study, the joint form ation mechanism was studied by a num erical model of plastic flow combined with experim ental approaches. A fluid-solid-interaction algorithm was proposed to establish the coupling model, and the material to be welded was treated as non-New tonian fluid. The thread structure and the milling facets on tool pin prom oted drastic turbulence of material. The thread structure converged the plasticized material by its inclined plane, and then drove the attached material to refill the welds. The milling facets brought about the periodic dynamic material flow. The thread structure and the milling facets increased the strain rate greatly under the extremely low heat input, which avoided the welding defects. The condition of the peak tem perature of 648 K and the strain rate of 151 s^-1 attributed to the lowest coarsening degree of precipitate. The tensile strength of the joint reached 265 MPa, equivalent to 86% of base material. The amelioration via the material flow model inhibits the welding defects and optimizes the param eter intervals, providing references to extracting process-structure-property linkages for friction stir welding. 展开更多
关键词 Friction STIR welding JOINT formation Material flow AL-MG-SI alloy Microstructure Mechanical properties
Interfacial bonding mechanism in Al/coated steel dissimilar refill friction stir spot welds
16
作者 Z. Shen Y. Ding +4 位作者 J. Chen B. Shalch Amirkhiz J.Z. Wen L. Fu A.P. Gerlich 《材料科学技术学报:英文版》 SCIE EI CAS CSCD 2019年第6期1027-1038,共12页
Defect-free dissimilar Al/zinc coated steel and Al/AlSi coated steel welds were successfully fabricated by refill friction stir spot welding. However, Al alloy and uncoated steel could not be welded under the same wel... Defect-free dissimilar Al/zinc coated steel and Al/AlSi coated steel welds were successfully fabricated by refill friction stir spot welding. However, Al alloy and uncoated steel could not be welded under the same welding condition. Al-Zn eutectic layer formed at the Al/zinc coated steel interface showed nonuniformity in thickness and nanoscale intermetallic(IMC) produced was discontinuous. The bonding formation between the Al-Zn layer and the surrounding materials was attributed to a liquid/solid reaction mechanism. Bonding formation at Al alloy and AlSi coated steel interface was attributed to a solid/solid reaction mechanism, as the joining process did not involve with melting of base metals or AlSi coating materials. Kissing bond formed at the weld boundary acted as a crack initiation and propagation site,and the present study showed that weld strength of Al 5754/AlSi coated steel was greatly influenced by properties of original IMC layer. 展开更多
关键词 REFILL FRICTION STIR spot welding Al alloy STEEL Coated materials Joining MECHANISM
盾构机管片拼装机振动与摩擦分析 预览
17
作者 李穗婷 谢小鹏 +1 位作者 宗伟奇 潘志 《润滑与密封》 CAS CSCD 北大核心 2019年第2期114-117,132共5页
针对盾构机管片拼装过程中,管片拼装机运行到水平或者垂直位置时发生剧烈振动和产生噪声的问题,对管片拼装机的运动机制进行分析,利用ADAMS对管片拼装机进行运动学和动力学仿真分析,得到运动过程中关键部件的受力情况。仿真结果表明:管... 针对盾构机管片拼装过程中,管片拼装机运行到水平或者垂直位置时发生剧烈振动和产生噪声的问题,对管片拼装机的运动机制进行分析,利用ADAMS对管片拼装机进行运动学和动力学仿真分析,得到运动过程中关键部件的受力情况。仿真结果表明:管片拼装机运行至水平和垂直位置出现振动和噪声可能的原因有2种,加工精度不够导致摩擦力过大和接触应力比较大的接触面由于空隙发生碰撞。提出在空隙间增加金属橡胶涂层来减少接触面之间接触应力的解决方案,并通过ADAMS仿真验证该方案能减少接触应力,从而能有效消除振动和噪声。 展开更多
关键词 管片拼装机 ADAMS 振动 摩擦力
在线阅读 下载PDF
石墨烯基润滑剂的制备与性能 预览
18
作者 闫思梦 张少丹 +2 位作者 杨旺 许永清 赵雄燕 《应用化工》 CAS CSCD 北大核心 2019年第7期1740-1743,1748共5页
综述了近年石墨烯基润滑剂的研究现状和最新进展,并对其今后的发展趋势和需要解决的关键技术进行了分析与讨论。提高石墨烯在润滑剂体系中的分散效果和开发润滑剂用功能化石墨烯的低成本、绿色环保制备技术将是今后的主要发展方向。
关键词 润滑剂 石墨烯 功能化石墨烯 摩擦
在线阅读 下载PDF
Resin Matrix Brake Materials Reinforced by Nano-Al2O3 for Mining Equipment
19
作者 崔功军 HAN Junrui 《武汉理工大学学报:材料科学英文版》 SCIE EI CAS 2019年第1期75-81,共7页
To verify the effect of Al2O3 particle content and size as an abrasive on resin matrix friction materials for mining equipment, the tribological performance of friction materials was studied by using a blockon-ring tr... To verify the effect of Al2O3 particle content and size as an abrasive on resin matrix friction materials for mining equipment, the tribological performance of friction materials was studied by using a blockon-ring tribotester over a wide range of applied load and sliding speed. The testing conditions simulated brake conditions of mining equipment. The antiwear property of nano-Al2O3 was superior to that of micro-Al2O3 for friction materials. The friction coefficients of specimens increased with the increase of nano-Al2O3 content. The wear rates decreased with increasing nano-Al2O3 content. The wear rates of specimens containing nano-Al2O3 was about 2-8 times lower than that of specimen with micro-Al2O3. The specimen with 10.5 vol% nano-Al2O3 showed the best tribological properties. The wear mechanism of specimens with nano-Al2O3 was abrasive wear and plastic deformation. 展开更多
关键词 COMPOSITE brakes FRICTION WEAR
主泵电机导瓦瓦温爬升分析与处理 预览
20
作者 石洋 范秀丽 《电工技术》 2019年第1期141-142,共2页
针对某核电#2机组#1主泵电机维修后试车时出现的上导瓦温度爬升问题,通过对比设备安装和运行数据,结合热平衡和摩擦发热原理,从润滑油流量体积和轴瓦间隙对导瓦温度的影响进行分析,找到缺陷原因是轴瓦间隙偏小。通过磨削导瓦支撑、调整... 针对某核电#2机组#1主泵电机维修后试车时出现的上导瓦温度爬升问题,通过对比设备安装和运行数据,结合热平衡和摩擦发热原理,从润滑油流量体积和轴瓦间隙对导瓦温度的影响进行分析,找到缺陷原因是轴瓦间隙偏小。通过磨削导瓦支撑、调整垫块、放大导瓦间隙,上导瓦温度恢复正常。 展开更多
关键词 主泵电机 导瓦 温度 瓦隙 摩擦
在线阅读 免费下载
上一页 1 2 250 下一页 到第
使用帮助 返回顶部 意见反馈