期刊文献+

高镍三元正极材料LiNi0.8Co0.1Mn0.1O2的合成与改性 认领

Synthesis and Modification of High-Ni NCM LiNi0.8Co0.1Mn0.1O2
在线阅读 下载PDF
收藏 分享 导出
摘要 LiNi0.8Co0.1Mn0.1O2是一种具有高能量密度的锂离子电池正极材料,但实际应用中的循环性能不佳、热稳定性差等缺陷亟待改善。本研究通过高温固相反应法制备了LiNi0.8-Co0.1Mn0.1O2材料,并采用H3BO3对其进行包覆改性。扫描电镜(SEM)显示包覆热处理后正极材料表面形成了一层不均匀絮状包覆物,X射线光电子能谱(XPS)测试显示该包覆物为LiBO2和Li2B4O7的混合物。电化学测试表明包覆物有效减缓了循环过程中的阻抗增加,显著提升了正极材料的容量与循环性能,其中0.5%包覆的正极材料0.2 C首次放电容量达到195.9 mAh·g^-1,1 C循环100周后容量保持率达到88.7%。 As one of Li-ion battery cathode,LiNi0.8Co0.1Mn0.1O2 has high power density,but poor cycling and thermal performance.In this study,it was prepared by high temperature solid reaction,then coated with H3BO3.Inhomogeneous layer on the surface of LiNi0.8Co0.1-Mn0.1O2,can be seen under SEM,and characterized to be a mixture of LiBO2 and Li2B4O7 by XPS.Through electrochemical test,this layer can lower the impedance increasement efficiently through cycling procedure,and contribute to the capacity and cycling performance remarkably.Especially,LiNi0.8Co0.1Mn0.1O2,coated with 0.5%H3BO3,has 195.9 mAh·g-1of capacity under 0.2 C circumstance,and 88.7%of capacity retention after 100 cycles under 1 C circumstance.
作者 陈明峰 袁徐俊 佘圣贤 黄晓笑 CHEN Mingfeng;YUAN Xujun;SHE Shengxian;HUANG Xiaoxiao(Research Department of Battery Material,Ningbo Ronbay New Energy Technology Co.,Ltd.,Yuyao 315400,China)
出处 《青岛科技大学学报:自然科学版》 CAS 2020年第5期41-46,共6页 Journal of Qingdao University of Science and Technology:Natural Science Edition
基金 科技创新2025重大专项项目(2019B10113).
关键词 LiNi0.8Co0.1Mn0.1O2 正极材料 锂离子电池 包覆改性 LiNi0.8Co0.1Mn0.1O2 cathode material lithium ion battery modification
  • 相关文献

参考文献1

二级参考文献14

  • 1Ohzuku T,Makimura Y.Layered lithium insertion material of LiCo1/3Ni1/3Mn1/3O2 for lithium-ion batteries[J].Chemistry Letters,2001,30(7):642-643. 被引量:1
  • 2Fujii Y,Miura H,Suzuki N,et al.Structural and electrochemical properties of LiNi1/3Co1/3Mn1/3O2:calcination temperature dependence[J].Journal of Power Sources,2007,171 (2):894-903. 被引量:1
  • 3Fergus J W.Recent developments in cathode materials for lithium ion batteries[J].Journal of Power Sources,2010,195(4):939-954. 被引量:1
  • 4Kang S H,Kim J,Stoll M E,et al.Layered Li (Ni0.5-x-Mn0.5-xM'2x) O2 (M' =Co,Al,Ti ; x =0,0.025) cathode materials for Li-ion rechargeable batteries[J].Journal of Power Sources,2002,112 (1):41-48. 被引量:1
  • 5Li D,Muta T,Noguchi H.Electrochemical characteristics of LiNi0.5 Mn0.5-xTixO2 prepared by solid state method[J].Journal of Power Sources,2004,135 (1/2):262-266. 被引量:1
  • 6Saint J A,Best A S,Hollenkamp A F,et al.Compatibility of LixTiyMn1-yO2 (y =0,0.11) electrode materials with pyrrolidinium-based ionic liquid electrolyte systems[J].Journal of the Electrochemical Society,2008,155 (2):A172-A180. 被引量:1
  • 7Kim J M,Chung H T.Electrochemical characteristics of orthorhombic LiMnO2 with different degrees of stacking faults[J].Journal of Power Sources,2003,115 (1):125-130. 被引量:1
  • 8Jang Y,Huang B,Chiang Y M,et al.Electrochemical cycling induced spinel formation in high charge capacity or thorhombic LiMnO2[J].Journal of the Electrochemical Society,1999,146(9):3217-3223. 被引量:1
  • 9He Y,Pei L,Liao X,et al.Synthesis of LiNi1/3 Co1/3 Mn1/3O2-zFz cathode material from oxalate precursors for lithium ion battery[J].Journal of Fluorine Chemistry,2007,128(2):139-143. 被引量:1
  • 10Yabuuchi N,Ohzuku T.Novel lithium insertion material of Li[Ni1/3Co1/3Mn1/3] O2 for advanced lithium-ion batteries[J].Journal of Power Sources,2003,119/121 (1/2):171-174. 被引量:1

共引文献8

维普数据出版直通车
今日学术
投稿分析
职称考试

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部 意见反馈